Stealth Hitches Hidden Rack Receiver - Custom Fit - 2"

Stealth Hitches Trailer Hitch - 391AUDA4A5S509

This completely hidden hitch keeps your vehicle looking like it just came off the assembly line. Remove the receiver for a fully concealed look when you're not carrying your bikes to the trail. Only for use with hitch-mounted racks and carriers.

Features:

• Custom-fit rack receiver lets you carry a bike rack or cargo carrier with your vehicle
• Totally hidden design offers a clean, from-the-factory look
  • Cross tube is concealed behind your rear bumper
  • Receiver detaches with no tools and can be stowed away when not in use
• Sturdy center block allows secure mounting and easy removal of rack receiver
  • Integrated lock protects the rack receiver from theft
  • Durable stainless steel construction resists corrosion
• Hitch won't affect ground clearance or block your trunk's foot-access sensor
• Simple, bolt-on installation - no drilling or welding required
  • Uses existing connection points to protect your vehicle's crumple zones
• Black powder coat finish offers superior rust protection
• Meets SAE J684 safety regulations
• Made in the USA

Specs:

• Receiver opening: 2" x 2"
• Maximum tongue weight: 350 lbs
• Limited lifetime warranty

Note: This rack receiver is for hitch-mounted accessories only. The receiver tube included with this hitch cannot be used for towing.

If you would like to upgrade this rack receiver for towing, you will need to purchase the Stealth Hitches towing kit (391CONVA5 - sold separately). The ball mount included in this kit inserts into the center block of the hitch in place of the receiver attachment. A 2" hitch ball is included with the ball mount, making it ready to tow with out of the box.

• Maximum gross trailer weight with towing kit: 3,500 lbs
• Not rated for weight distribution systems

If you want to take your bikes to the trail with your family this summer, you have plenty of options. You can carry your bikes on top of your car with a roof rack, but that bulky rack can increase drag on your ride. You can use a trunk rack, but that's a pain to mount and it can scratch your car's paint. Or you can install a hitch on your ride and use a hitch-mounted bike rack to carry your bikes.

This rack receiver is designed to act as a mounting point for your hitch bike rack or cargo carrier. Just slide the shank of your carrier into the receiver for use, and when you're done you can not only remove the carrier, but the receiver as well, leaving your vehicle looking clean and unmodified.

Completely Hidden Design

Nothing can ruin the clean, stylish look of your vehicle like a giant piece of metal bolted beneath its bumper. Luckily, with the Stealth Hitches rack receiver, you never have to worry about messing up your vehicle's lines.

This hitch installs behind your bumper, keeping the cross tube concealed and leaving only the hitch receiver visible. Even better, the receiver can be easily removed from the cross tube when it's not in use so that you won't see any trace of the hitch. This means that you can retain that clean, from-the-factory look for your ride, while still being able to carry your bikes and gear on the next family road trip.

Simple Set Up

The receiver can be attached or detached in seconds with no tools required. To insert the receiver, simply pop the base up into the stainless steel block at the center of the hitch until it automatically latches in place.

Be sure to then press the lock on the side of the block to fully secure the receiver. When you're finished carrying your bikes or cargo, use the included key to unlock the latch. Then turn the handle on the block clockwise and remove the receiver. You can stow the receiver in a safe place, like your vehicle's rear cargo area, or you can use a convenient carrying case (391CASER - sold separately).

And when you're not using the receiver attachment, the included hitch plug covers the center block's opening to protect the hitch's body from dirt and debris.

etrailer.com Technical Support

At etrailer.com we're committed to the products we sell, and to our customers. Our experienced and knowledgeable staff are available via both phone and email to address your questions and concerns for the lifetime of your hitch. The technicians at etrailer perform hitch installations on a daily basis, making them a valuable resource for do-it-yourselfers. The one-on-one, personal service you'll receive comes straight from an expert in the towing and automotive field. We've installed it, we've wired it, and we've towed with it, so whatever your question, we can answer it.

SHR30007 Stealth Hitch Hidden Receiver Rack Package - Custom Fit - 2"

Installation Details 

Alternate Instructions 

This Product Fits The Following Vehicles

• 2009 - 2016 Audi A4 Allroad Quattro
• 2009 - 2016 Audi A4 Sedan
• 2017 - 2017 Audi A5
• 2010 - 2016 Audi A5 with Dual Muffler
• 2010 - 2016 Audi A5 with Single Muffler
• 2013 - 2016 Audi Allroad
• 2010 - 2016 Audi S4
• 2010 - 2017 Audi S5

Tech Tip

The included receiver is not designed for trailer towing. The Towing Package Upgrade Kit, 391CONVA5 (sold separately), is required for towing capability. No drilling required for installation , Requires temporary removal of bumper/fascia during installation , Fascia trimming required